- Sy.No.819/Part, Kistapur Road, Medchal, Hyderabad.
- 9440247110
info@techmechcranes.com
TechMech Cranes is a leading crane manufacturer, offering engineered crane manufacturing and material handling equipment solutions for industrial lifting applications. The company was founded in 2011 and manufactures a variety of cranes and lifting equipment based on application including EOT Cranes, gantry and goliath cranes, Jib Cranes, electric hoists, electric winches and other material handling equipment. TechMech works with customers to determine the suitable configurations of cranes for their load handling, workspace and operational needs. Crane Design offers capabilities for customization, testing and project support.
Industrial lifting needs vary with the nature of the load, work areas, frequency of operation and plant layout. Our crane manufacturing approach considers the application factors, instead of treating all lifting requirements the same.
The company builds Industrial Cranes and associated Lifting Equipment for material movement, production support, equipment handling, storage operations and other industrial applications. The product portfolio offers various crane configurations and supporting equipment, providing customers with the possibility of choosing solutions based on their operational needs.
TechMech is an industrial crane manufacturer that combines engineering, customization, fabrication, testing and project support to deliver suitable lifting solutions for a variety of industrial environments.
These cranes are used to lift and move materials in manufacturing plants, workshops, warehouses and other industrial facilities. TechMech provides single-girder, double-girder and underslung EOT crane configurations. The selection will depend upon the Load Capacity, Span, Lift Height, duty requirements and space available in the building.
These cranes can be adapted to meet a range of industrial handling requirements, including the movement of raw materials, components, machinery and finished products within defined work areas.
Gantry Cranes and Goliath Cranes are ideal for applications where the crane structure is supported on support legs and moves on rails or tracks at ground level. They are ideal for open yards, fabrication areas, warehouses and industrial handling operations where conventional overhead crane arrangements are impractical.
TechMech also provides semi-gantry configurations where the available building and operating arrangement require a different support configuration.
Jib Cranes are used for localized lifting and material handling in defined work areas. They are suitable for use at production stations, assembly points, machine loading points and other points where materials need to be lifted and positioned over a limited operating radius.
The configuration can be selected according to the lifting application, workspace and movement requirements.
In addition to the above, TechMech’s material handling range includes electric winches, electric hoists, HOT cranes, trolleys, goods lifts and other supporting equipment. These solutions can be used to supplement crane systems where special requirements are needed for lifting, positioning or material transfer.
Effective crane design begins with an understanding of how the equipment will be used at the customer’s site. Important considerations are load characteristics, working area, travel distance, frequency of operation, available headroom, structural arrangement and environmental conditions.
TechMech’s engineering approach includes application assessment, configuration selection and design development. Engineering also involves CAD based modeling and drawings for crane development.
The crane configuration may be developed based on the following factors depending on the project:
The application oriented approach provides a way to define a proper configuration of the crane, before fabricating and installation.
Industrial lifting requirements can vary greatly, whether you are in a manufacturing plant, warehouse, fabrication facility or heavy engineering site.
So, the standard configuration might have to be altered to suit the space and the operating conditions.
TechMech offers tailor-made crane solutions as per industry requirements. Customization may be based on crane configuration, crane dimensions, lifting arrangement,controls, travel requirements and other project specific parameters.
The objective is to develop an Industrial Crane solution that meets the customer’s real handling needs, including operational and site restrictions.
The process starts with understanding the application and developing the required engineering configuration. The arrangement of the crane is made before fabrication by CAD based modeling and drawings.
After engineering, structural and mechanical components are fabricated and assembled to the required configuration. Crane fabrication is an important part of developing the structural and mechanical arrangement required for the application.
Testing is an important part before the equipment is taken into operation. TechMech’s manufacturing process involves safety and load testing, surface treatment, finishing and quality checks before dispatch.
Crane Installation requires coordination between the equipment, site conditions, and supporting structures. TechMech provides installation and project support for crane systems, along with after-sales service capabilities.
Crane Commissioning and testing are part of the project support process before the equipment is put into regular operation where required.
Crane engineering and manufacturing shall consider applicable design, structural and operational requirements. TechMech’s data on crane manufacturing refers to standards such as IS 3177, IS 807 and IS 800.
The applicable standard or standards combination depends on the type of crane, structural arrangement and project requirements. Therefore, standards should be considered in developing engineering and specifications rather than an all-inclusive requirement.Quality checks, testing and inspection also help to verify the equipment before dispatch and installation.
TechMech provides material handling solutions for industrial environments where lifting and movement of equipment or materials is an everyday part of operations.Typical applications are:
The most appropriate type of crane depends on the load, the operating conditions, the available space, the frequency of handling and the movement requirements of each application.
We do not just sell cranes; we evaluate the requirements of our partners and then offer advice accordingly.
The product range includes EOT Cranes, gantry and goliath cranes, jib cranes, electric hoists, winches, trolleys and other material handling equipment.
Every project requirement differs based on the project. For this reason, we have built our expertise in making varied changes to our equipment as needed by our partners.
TechMech provides engineering, installation and after-sales support to help customers through the various phases of the crane project, in addition to the supply of equipment.
Accurate application information helps to determine the right crane configuration and to prepare a more relevant quotation.
| Requirement | Information to Provide |
|---|---|
| Crane application | Purpose and material handling operation |
| Load capacity | Maximum load to be lifted |
| Span | Required crane working width |
| Lift height | Required hook or lifting height |
| Operating conditions | Frequency, environment and working cycle |
| Crane configuration | EOT, gantry, jib or other requirement |
| Site details | Building, floor, runway or installation information |
| Quantity | Number of cranes required |
| Special requirements | Controls, lifting arrangement or other specifications |
The more complete the project information is, the easier it is to evaluate the appropriate Crane Design, configuration and supporting equipment.
TechMech provides different industrial crane configurations including EOT cranes, gantry and goliath cranes, semi-gantry cranes and jib cranes. Its material handling range also includes electric hoists, electric winches, trolleys and other equipment.
Yes. Crane configurations can be developed or modified according to application requirements, available space, load characteristics, operating conditions and other project-specific factors.
Important information includes application, load capacity, span, lift height, operating frequency, crane type, site conditions, quantity and any special requirements.
Required capacity is based on the maximum load that must be lifted, together with the application, operating conditions and lifting arrangement. The actual crane configuration should be determined through application-specific engineering.
Yes. TechMech supplies cranes for small-scale industries as well as other industrial applications.
Applicable standards depend on the crane type and project requirements. TechMech's crane engineering and manufacturing information references IS 3177, IS 807 and IS 800 for relevant crane requirements.
Yes. TechMech provides testing, installation and project support, with its manufacturing process including load testing and quality checks before dispatch.
TechMech Cranes have a strong tradition of being designed and built to provide reliable material handling solutions for our valued domestic and international customers.
